e - phemt mmic ACQ102 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 1 / 5 version 1.4 product features application s ? small size (4x4 mm) ? high g ain ? high linearity ? low cost ? low noise figure ? low noise amplifier for catv, satellite ? cable modem ? ftth (g - pon, ge - pon) ? optical node description ACQ102 is designed as low cost drive amplifiers for many applications including ftth, catv system . this mmic is based on gallium arsenide enhancement mode p hemt which shows low current draw and very low noise. the data in this spec sheet is valid only for 75 ohm application. 50 ohm dat a is in a separate spec sheet. electrical specifications parameter unit min typ max condition frequency mhz 3 0 1000 - gain db 20 2 1.5 - - gain flatness db - 0.5 1 - input return loss db - - 1 5 - 8 - output return loss db - - 1 5 - 10 - output ip3 dbm 3 3 38 - - 1db compression point dbm 17 2 1 - - noise figure db - 2. 5 4 - cso 30 ~ 870mhz dbc - - 60 - 55 135 channel, +30dbmv/ch ctb dbc - - 6 5 - 6 0 135 channel, +30dbmv/ch xmod dbc - - 6 3 - 58 135 channel, +30dbmv/ch dc current ma 90 1 3 0 1 7 0 v dd = + 5.0v note 1. test conditions unless otherwise noted. test freq = 500mhz, t=25 , v dd =5v, 75? system 2. oip3 measured with 2 tones at an output power of + 5 dbm/tone separated by 1mhz absolute maximum ratings parameter unit min typ max condition device voltage v dc - 5 10 - operating temperature - 40 - 85 - storage temperature - 5 0 - 150 - esd human body model - - class 1 c - - moisture sensitivity level - - msl1 - - junction temperature - - 180 - thermal resistance (rth) /w - 7 0 - - package type : qfn 4x4
e - phemt mmic ACQ102 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 2 / 5 version 1.4 application cir cuit @ 3 0 ~ 1000mhz, 75ohm system 300 pf input 100 nf 1 k ? + 5 v + 5 v 1 uh ( wire wound ) 120 ? 6 pf 8 . 2 nh 10 k ? 100 nf 0 ? 20 11 1 2 . 2 ? 300 pf 8 . 2 nh output pcb material (fr4), pcb thickness (0.8t), via hole ( 0.6) typical performance @ vdd=5v, id=1 2 0ma, t=25 , 75ohm system s - parameter noise figure vs frequency 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.0 1.1 0 5 10 15 20 -5 25 -20 -10 0 10 20 -30 30 freq(ghz) return loss(db) gain(db) 0 1 2 3 4 5 10 200 400 600 800 1000 freq(mhz) n f (d b ) oip3 vs fre quency p1db vs frequency 20 25 30 35 40 45 50 200 400 600 800 1000 freq(mhz) oip3(dbm) 0 5 10 15 20 25 50 200 400 600 800 1000 freq(mhz) p1db(dbm) s21 s22 s11
e - phemt mmic ACQ102 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 3 / 5 version 1.4 multi - tone test : 135ch_flat@output power +30dbmv/ch xmd vs frequency ctb vs frequency -80 -76 -72 -68 -64 -60 55.25 109.25 331.25 547.25 745.25 freq(mhz) xmd(dbc) -80 -76 -72 -68 -64 -60 55.25 109.25 331.25 547.25 745.25 freq(mhz) ctb(dbc) cso vs frequency -78 -74 -70 -66 -62 -58 55.25 109.25 331.25 547.25 745.25 freq(mhz) cso(dbc) n - flr n - flr xmd ctb cso( C ) cso(+) n - flr
e - phemt mmic ACQ102 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 4 / 5 version 1.4 package dimension (type: qfn4x4 ) * u nit: mm[inch] | tolerance 0. 2 [.00 8 ] top view side view bottom view *n/c: not connected pin description pin no function pin no function pin no function pin no function 1 n/c 6 n/c 11 rf output / vdd (+5v) 16 n/c 2 n/c 7 n/c 12 n/c 17 n/c 3 n/c 8 n/c 13 n/c 18 n/c 4 n/c 9 n/c 14 n/c 19 n/c 5 n/c 10 n/c 15 n/c 20 rf input / bias control * mounting configuration notes 1. ground / thermal via holes are critical for the proper performance of this device. 2. add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. mounting screws can be added near the part to fasten the board to a heatsink. ensure that the gro und / thermal via hole re gion contacts the heatsink. 4. do not put solder mask o n the backside of the pcb in the region where the board contacts the heatsink. 5. rf trace width depends upon the pcb material and construction. 6. use 1 oz. copper minimum.
e - phemt mmic ACQ102 korean facilities : 82 - 31 - 250 - 5078 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 5 / 5 version 1.4 revision history part number release date version modification data sheet statu s a cq102 201 4 . 0 4 . 22 1. 4 absolute maximum ratings (delete tj typ) - ACQ102 2012. 0 9.10 1.3 new datasheet format - ACQ102 2010.12. 24 1.2 absolute rating specifications updated - rfhic corporation reserves the right to make changes to any products here in or to discontinue any product at any time without notice. while product specifications have been thoroughly examined for reliability, rfhic corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. rfhic corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inc luding without limitation consequential or incidental damages. rfhic products are not intended for use in life support equipment or application where malfunction o f the product can be expected to result in personal injury or death. buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold rfhic corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorize d use. sales, inquiries and support should be directed to the local authorized geographic distributor for rfhic corporation. for customers in t he us, please contact the us sales team at 919 - 6 77 - 8780. for all other inquiries, please contact the international sales team at 82 - 31 - 250 - 5078.
|
